Tropf Blumat Pressure Reducer For 1/2″ Hosepipe

Fitting to the Hose :

Fit the Gardena Snap-On Hose Connector to the end of your existing ½ inch / 13mm hosepipe.

Into the top of the Pressure Reducer screw the grey adaptor.

This will then allow you to ‘push fit’ the Snap-On Hose Connector onto the Pressure Reducer, thus connecting it to your hosepipe.

Fitting the ¼ inch / 6mm Tube :

At the base of the Pressure Reducer just unscrew the retaining cap and slip it onto the ¼ inch / 6mm tube.

Push the ¼ inch / 6mm tube onto the barbed fitting and screw the retaining cap back onto the Pressure Reducer to hold the tube securely in place.

Water Filter :
Within the Pressure Reducer is a mesh water filter to prevent any small particles getting into the watering system & blocking the tube or nozzles. The filter is easily accessible for simple cleaning. 

Please note: designed for use as part of the Tropf Blumat Drip Watering System ONLY.

Click here to see how to use this Pressure Reducer.