Standard Black Barrel Water Butt 210 Litre With Stand And Diverter

Dimensions :
Water Butt – approximately 3ft 2in / 97cm high, 1ft 10½in / 57cm diameter. 
Stand – approximately 12in (30cm) high. 
Capacity 210 litres (46 gallons).

Manufactured from 100% recycled plastic which is UV stabilised and weather resistant for a long life. Please note – if temperatures fall below freezing you should drain the water butt.

Safe lockable lid allows you to dunk your watering can if you don’t want to fill it using the tap.

Supplied complete with tap which fits securely into the pre drilled point near the base of the water butt.

Diverter included this enables you to connect the water butt to a plastic downpipe. It will fit 68mm round or 65mm square plastic downpipes (which covers the majority of domestically used downpipes). It is not suitable for cast iron downpipes. This diverter includes a 18½in / 47cm  x 1¼in / 20mm diameter flexible hose to carry the water from the downpipe to the water butt. Once fitted, when the water butt is full, the excess water will go down the downpipe rather than flooding the water butt.

Water Barrel Stand securely lifts the water butt off the ground by 12in / 30cm, placing the tap in the perfect position for filling a bucket or watering can.   

Click here to see Rain Diverter fitting instructions.