Gardena Threaded Twin Tap Connector

Taps on the top of each branch of the connector enables the flow rate to be individually adjusted or shut off.

Outlets designed to take a Snap-On Hose Connector (available to purchase separately, see you may also like below) or remove the male adaptors on the outlets to enable a water controller to be securely screwed directly into position.

The distance between the two outlets allows for two water controllers (e.g. Flex Computer, see you may also like below) to be easily fitted.

Supplied complete with adaptors enabling it to be fitted to either 1 inch or ¾ inch (25mm or 19mm) threaded taps.

We are often asked how to ascertain the size of an outside tap.

The easy way is to measure the EXTERNAL diameter of the threaded portion of your tap and then subtract ¼ inch (6mm).

E.g. Measured diameter ¾ inch (19mm), tap size = ½ inch (13mm).

Click Here (and turn to page 5) for advice on choosing the correct connectors for your watering system.