Blumat Automatic Pot Plant Waterers

Benefits:

Ready to use at any time – it should take between 20-30 minutes to set up.

Pot plants can remain in their usual location – each waterer has a 31 inch (80cm) suction tube connected to it, so your water container can be placed up to 31 inches (80cm) from the plant being watered.

No repotting required – simply push the cone of the waterer into the soil surrounding your plant. Each waterer is able to keep a 6 inch (15cm) pot well watered.

Ideal watering system when you are away on holiday – this automatic watering system means only the water container needs topping up with water and all the pot plants which have their suction tube in the water will remain well watered. The amount of waterers which can be run from one water container is not limited – just remember the more waterers connected to the water container the faster it will empty, so use a larger container when watering lots of plants.  Can be used throughout the whole year.

Easy And Simple To Set Up . . . 

Remove the green cap from the Waterer and place the clay cone in a bowl of water for approximately 15 minutes. Then fill the Waterer with water up to the brim and press the green cap firmly back in place.

Insert the whole of the clay cone into the soil surrounding the plant to be watered. For pots up to 6 inches (15cm) in diameter one Waterer will be sufficient. For larger pots or containers place a probe every 6-8 inches (15-20cm) apart.

Immerse the suction pipe right down to the bottom of your chosen water container.

To work efficiently the green cap of the Waterer must be positioned so that it is above the water level in the water container. Raising or lowering the height of the water container raises or lowers the amount of water released.

Click here to see operating instructions for this watering system.